The Honeywell DT7450-EOL Dual Tec Intruder Alarm Motion Sensor is designed for touch commercial enviroments and features a powerful 15m x 18m Range.
NOTE: This Model has been replaced by the DT8016F5. Therefore you may receive the New Updated Model.
Advanced DualCore Signal Processing
Dualcore proscessing from honeywell is a truly powerful system and includes features such as concurrent diagnostics, digital fluorescent light interference filter, digital adaptive microwave threshold, adaptive baselines, and bi-directional temperature compensation.
Superb Detection Through K-Band Technology
K-Band microwave technology delivers sharp detection without holes or weak spots. The custom made source offers pattern shaping to fill the protected area with a broad, balloon-shaped pattern which matches the PIR pattern. It also offers pattern containment to reduce the penetration of microwave energy through walls.
Self-Testing for Consistently Reliable Operation
Concurrent diagnostics assure optimum performance and reliability. Self-testing is performed upon power-up and at least once every hour on the PIR, microwave, PCB circuitry and temperature compensation circuitry.
DualCore Signal Processing
PIR and microwave signals are analyzed in the microcontroller in multiple domains, including amplitude, time, frequency and duration to provide superior false alarm immunity without compromising detection. DualCore processing not only supports alarm functions, but also advanced temperature compensation, diagnostics, and false alarm features.
Uniform Sensitivity Optics
The custom-designed Fresnel lens provides the same sensitivity for human targets at the edge of the pattern as exists directly in front of the sensor, giving the DT7450-EOL consistent coverage throughout the protected area.
Advanced PIR sensor for commercial enviroments
Dualcore signal proscessing
K-band microwave technology
Sensitivity Optic technology
EOL resistors included
Range: 15 x 18 m.
PIR sensitivity: Low (3-5 steps), High (1-3 steps)
Frequency: 24.200GHz (K-Band)
Mounting height: 2.3m optimal
Power requirements: 7.5 – 16V dc, 25 mA typ., 30mA max at 12V dc, AC Ripple: 3V peak-to-peak at 12V dc nominal
Alarm relay: Form A (NC) / 125mA@25 Vdc, max. 20 Ohm, protective resistor
Tamper: (NC) 50mA, 24V dc - Cover & wall-removal
Operating temperature: -10oC to +55oC
Temp. compensation: Advanced dual slope
Relative humidity: 5% - 95% non condensing
RF Immunity: 30 V/m from 10MHz to 1000 MHz
PIR White Light Immunity: 6,500 Lux typical
Dimensions: 119 x 71 x 42 mm (HxWxD)
Weight: 185.5 g.
Comes with a 1 Year Manufactures Warranty from Honeywell