KnightsBridge Twin T8 58W IP65 240V Emergency Backup Non-Corrosive Lamp Fitting  £89.40

This IP65 230V high frequency non-corrosive fluorescent fitting from Knightsbridge is ideal for use indoor and outdoor such as warehouses, cattle sheds, barns, or hallways. 

Houses two 58W 5ft T8 lamps (not supplied with fitting), and is simple to install, with built-in Bracket for wall/ceiling mounting and 10 fixing clips for the diffuser supplied. 

This model features integral emergency power via an internal battery for up to three hours with an LED indicator. Electrical termination via 10Amp connector block.

Main Features:

IP65 certified (protected from dust, protected from low pressure jets of water from all directions)
Fitting houses two 58W 5ft T8 Lamps
Strong polycarbonate body
Easy install; all fittings supplied
Integral Emergency backup power

Technical specification:
Length: 1565
Width: 145
Height: 110
Fixing Centre: 1000
A2: 1110
Wattage: 2x58
Circuit Watts: 118
Number of clips: 12
Typical location: Indoor or Outdoor
Lamp Supplied: No
Voltage (V): 220 - 240V 50/60Hz
Class: Class I. Must be Earthed
IP: IP65
Photometric Testing: Yes
Instruction sheet: Yes
Pack Includes: Polycarbonate clips. Fixing brackets 20mm compression gland.
Dimmable: No

To view the manual for this product, Click Here

To complete installation of this product you may require a T8 1500mm 58W Bulb.