Grade: 2
Model: D75BNO
D75BNO is a standard Grade 2 surface contact.
The D75 is a standard surface contact complete with an internal PCB and wire clamping terminal blocks. 2 terminals govern the switch, 2 provide a tamper loop and the remaining two are left as spares. Terminals are marked on the PCB for ease of installation.
This is a rectangular contact with smooth, rounded edges. it provides an operating gap of approximately 35mm. Both contact and magnet are 78x24x20mm.
- 6 wire clamping screw down terminals are provided on the PCB – two for the switch, two for tamper and two unlinked spares.
- The tamper on this contact is provided by a sprung microswitch, which will detect removal of the lid.
- This contact is Normally Open (N/O) – The circuit through the contact is complete until the magnet is moved close by. With the magnet in close proximity, the circuit through the contact is broken.
- Supplied with fitting screws.
