Name: 2300W PIR Light Controller - White
Brand: Timeguard
SKU: 7811UK
Price: 24.20 GBP
Availability: InStock

Description
Reviews
Q&A (2)

Timeguard SLW2300/SLB2300 2300W PIR Light Controller

Powerful PIR controller for new and existing installations.

Total PIR switching: 2300W incandescent/halogen, 500W fluorescent/low energy plus 250W LED.
12m detection range with 180° area of detection.
Pan and tilt feature.
Light ON times adjustable from 5 seconds to 15 minutes.
LUX (light level) adjustment - Day to Night (2 to 1000).
Manual ON/OFF switching override.
IP55 weatherproof rating.
Simple and quick to fit terminal block connectors.
Dimensions: 93 x 78 x 141mm.

Technical Specification

Operating Voltage: 230V AC
Lamp Load (W): Fluorescent/Low Energy 500, Filament 2300, LED 250
Weatherproof Rating: IP55
Detection Range (Max) Metres: 12
Angle of Detection: 180°
Light ON Time After Last Detection (Adjustable): 5 Seconds (Min), 15 Minutes (Max)
Permanent ON Facility: Electronic
Adjustable Light Level Control: Yes
EC Directives: Conforms to Latest Directives
Overall Dimensions (mm): Height 93, Width 78, Depth 141

Comes with a 3 Year Manufactures Warranty

Be the first to review this product

Write A Review

Steven from United Kingdom asks

how do i override the PIR so that the fitting stops on permanently and back again to PRI operation?

Electrical World Replies:

Hello • The light can be switched ON for longer time periods by use of the Manual Override Mode. This can be activated at night time (only) by using the internal wall switch or circuit breaker. Switch the internal wall switch once (OFF/ON) within 1.5 seconds. • The unit will now illuminate continuously for 6 hours or until it is switched back into Auto Mode. • To return to Auto Mode, switch the internal wall switch OFF and then back ON again within 1.5 seconds. • The unit will return to its Auto Mode and will operate as set up after the walk test procedure. Thanks

Gerry Smith from United Kingdom asks

Can the sensor be fitted to a ceiling/undersideinsted of a vertical wall.

Electrical World Replies:

Hello It would affect the angle of detection if it was fitted on a ceiling Thanks

Ask Question Show all Questions & Answers in your language