Ronseal One Coat Fence Life gives colour and protection to rough sawn sheds and fences for up to two years, in just one coat.
• Colours and protects rough sawn wood
• All weather protection
• 100% showerproof in 1 hour
• Apply by brush or spray
• Protects your wood from greying
How To Paint Your Fence
Before You StartYou can’t use this stain on decking, garden furniture or other smooth planed wood. We have other products to help you with that.
Cold wet weather stops the stain from drying and could wash it off. So make sure it’s a warm day with the temperature above 10°C and no rain is forecast.
The wood needs to be clean and dry so the stain can soak in properly. To clean the wood, use a stiff brush to get rid of any dirt.
If you want to cover up a bright, strong or contrasting colour, you’ll need to use extra coats. This stain is safe to use around plants and pets.
ApplicationYou can either brush or spray your stain.
Brushing- Get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far.
- After one hour, it will be 100% showerproof. It takes 4 hours to dry fully.
- If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one.
Spraying- Pour the liquid into the tank.
- Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish.
- Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.
AftercareMaintenance
Regularly inspect your wood for signs of damage. If you notice any, just apply another coat of the stain to protect the wood.
Cleaning
Remove as much stain off your brush as possible and then clean them in warm soapy water.
You should never pour the leftover stain down drains or watercourses. Instead, contact your local council for ways to safely dispose of it.
Technical Specification:
Usage: New or previously stained rough sawn wood
Coverage: 6m² per litre. 5L will cover up to 6 fence panels
Dry time Rainproof in one hour, completely dry in four hours
Coat time: Four hours, if necessary
Number of coats: One
Finish: Matt
Durability: Protects from rain and won’t grey in the sunshine so colour lasts for up to two years
Application: Brush or spray
VOC: Low