|HomeAccess ControlESP Enterview 5 Hands Free Colour Door Entry Intercom Kit & Access Keypad||
ESP Enterview 5 Hands Free Colour Door Entry Intercom Kit & Access Keypad £428.50
**This item has been discontinued by the Manufacture, ESP. The closest alternative is the Aperta Single Way Colour Door Entry Kit with Keypad - Available Here. Please note: this is not compatible with the Enterview system**
The EV5CKPHF from ESP presents crystal clear colour imagery from your front door to the 7 monitor inside your building, allowing you to see any visitors or potential threats from an out-of-sight location. Bright LEDs provide fantastic illumination, so you can always make out a face, even in darkness.
The device cleverly combines video door entry with access control in a single compact unit. Built in to the vandal resistant camera unit is an illuminated pin code entry pad. The buildings occupiers simply key in their code for entry, visitors request entry by pressing the clearly marked door bell button.
EV5CKPHF provides superb full colour images in all light conditions along with high quality full duplex speech between handset and the external camera call point. Images at night are enhanced by automatic activation of 4 high intensity LEDs. The handset unit provides a facility to activate a lock release , transfer calls to other handsets and select the video feed from the camera call point on demand.
New to EV5 is the ability to connect two external camera call points. Very useful on buildings with front and rear entrances. In addition to an extra camera call point the system can also accept up to three further video handsets and two audio only handsets at convenient points around the property .
Cabling of Enterview 5 systems is simple, the included power supply feeds suitable voltage to both the monitor and camera. An Additional power supply ( EVBPS ) is only required when introducing a lock release. There is no need for specialist video cable, Cat5 is recommended (4 Core installation). Simply bring cable from the camera/s to a central location and then take a separate cable to each monitor on the system. Power supplies for the monitors can be located close to each monitor or centrally but should be no more than 40m from the monitor position.
Hands Free Monitor Features:
Door Access/Camera Features:
Whats in the kit?
Comes with a 3 year manufactures warranty
To see our full range of intercoms and intercom accessories, Click Here
To view the manufacturers manual for this product Click Here
Seen a lower price elsewhere? Electrical World will do our best to match any price request, simply click below