Dimplex FX20EIPX4 2kW Downflow Fan Heater
The Dimplex IPx4 Downflow Fan Heaters give unrivalled versatility when it comes to installation allowing greater installation flexibility in bathroom locations.
Combined with a sleek, modern look, these IPx4 rated FX downflow heaters provide an ideal heating solution for almost any bathroom, en suite or kitchen.
The FX20IPX4 has pull cord operation only.
The FX20EIPX4 allows for time period adjustment between 5 and 155 minutes on installation but the heater can be manually switched off before time period expires. Energy-saving electronic timer automatically switches heater off after a preset time period to prevent it being left on accidentally.
Identical footprint to current FX20 models, meaning that retro-fitting an IPX4 model is incredibly simple and a energy-saving thermostat switches output down to 1kW once the room is warm (function on 2kW setting only)
This model has a run-back timer which can be set on a run time of 5 to 155 minutes. This can be adjusted by removing the top cover and moving the jumpers on the timer.
Innovative patented* design.
Time period adjustable between 5 and 155 minutes on installation.
Heater can be manually switched off before time period expires.
2kW maximum output.
Pull cord operation.
Identical footprint to current FX20 models, meaning that retro-fitting an IPX4 model is incredibly simple.
Energy saving electronic timer automatically switches heater off after a preset time period to prevent it being left on accidentally.
1kW output selectable on installation.
Controls: Pull cord operation
Heat Output (kW): 2
Heat Selection: Off / 1.0kW / 2.0kW
Heat source: Electricity
Installation: Two upper keyhole slots are provided together with a third fixing hole.
Insulation: Two upper keyhole slots are provided together with a third fixing hole to secure the heater to the wall. 2kW or 1kW heat ouput selectable upon installation. Identical footprint to current FX20 models, meaning that retro-fitting an IPX4 model us incredibly easy
IP Rating: IP24
Location of Heat Output: Grille at the bottom.
Dimensions: 132mm (Depth) x 267mm (Height) x 252mm (Width)
Recommended Mounting Height (m): 1.8
Cable Exit Point: Middle, Top
Cable Length (m): Supplied by Installer
Construction: Double insulated plastic case. Moulded in flame retardant self extinguishing grade nylon.
Electric supply: ~230-240V
Element type: 2kW stitched type with thermal fuse protection
Safety Cut Out: Manually resettable thermal overload cut out and thermal fuselink
Suitable for which room/s: Bathrooms, En-suites etc
Technical Specification Sheet
Comes with a 1 Year Manufactures Warranty