Here are some ideas for some DIY projects.
In each section, you can find a list of tools required, as well as instructions.
Tools You May Need:
Combined wire cutters / stripper
Flat Screwdriver
PoziDrive Screwdriver
22mm Flat Bit
Tape Measure
Digital Multimeter
See full instructions here
Tools You Will Need:
Combined wire cutters / stripper
Flat Screwdriver
Digital Multimeter
See full instructions here
Tools You Will Need:
Combined wire cutters / stripper
Flat Screwdriver
Digital Multimeter
See full instructions here
Tools You Will Need:
Punch Down Stripping Tool
Slotted Parallel Flat Head Insulated Screwdriver
Screwdriver
Self Driving Wood Screws
Telephone Master Socket Flush Wall Switch
ADSL Broadband Faceplate Splitter Adaptor Socket.
ADSL Filtered BT / RJ11 Phone / Network Faceplate
See full instructions here
Tools You Will Need:
Insulated Screwdriver
Insulated Electrician's Pliers
A Reliable Voltage Tester
MCB Lock
Socket Polarity Tester
You can pick up the entire USB Socket Wiring Kit at a reduced price if you need these items to complete this project.
See full instructions here
Tools You Will Need:
3.5mm Blade Screwdriver recommended for switch screws
Depending on the dimming switch will depend on the type of screwdiver you need for the connection screws, generally you will need a 2.5mm or a 3mm.
See full instructions here
Tools You Will Need:
Water Pump Pliers
Plumbing fittings will depend on if you are replacing an existing tap or using this for a new sink
Plumbers Tape
Wall Socket
Back Box
Cable to connect your socket to an existing ring
If your water pressure is too high, we would advise fitting a Pressure Reducing Valve which will enable you to control the flow to the tap
See full instructions here
See full instructions here